Automatic Hydraulic Cap Making Machine Plastic Cap injection Molding Machine
DESCRIPTION
The production of oil pull caps by injection molding machines is an important manufacturing technology widely used in the packaging industry and daily life. It not only provides high-quality oil pull cap products, but also provides sustainable solutions for economic development and resource utilization. The process of making oil pull caps using injection molding machines has the potential for further development and innovation to meet the market demand for new oil pull cap products.
Overall, injection molding machines are an important equipment widely used in the production of plastic products such as oil pull caps. Through reasonable operation and control, injection molding machines can efficiently and stably produce high-quality oil pull cap products to meet market demand.
Technical Parameter
| INJECTION UNIT | K-TEC120 | K-TEC140 | K-TEC170 | K-TEC230 | K-TEC270 | |||||||||||
| Screw diameter | mm | 35 | 38 | 42 | 38 | 42 | 45 | 42 | 45 | 50 | 45 | 50 | 55 | 50 | ||
| Screw L/D ratio | L/D | 22.8 | 21 | 19 | 22.1 | 20 | 18.7 | 23.5 | 22 | 19.8 | 23.4 | 21 | 19.1 | 25.2 | ||
| Shot volume(theoretical) | cm³ | 163 | 192 | 235 | 226 | 277 | 318 | 311 | 357 | 441 | 397 | 490 | 593 | 530 | ||
| Shot weight | g | 148 | 175 | 214 | 206 | 252 | 289 | 283 | 325 | 401 | 362 | 446 | 540 | 482 | ||
| Injection rate | g/s | 92 | 108 | 130 | 94 | 115 | 132 | 138 | 160 | 196 | 124 | 154 | 186 | 187 | ||
| Injection pressure | Mpa | 219 | 186 | 158 | 209 | 171 | 149 | 203 | 177 | 143 | 207 | 168 | 138 | 205 | ||
| Screw speed | r.p.m | 220 | 220 | 200 | 175 | 185 | ||||||||||
| CLAMPING | ||||||||||||||||
| Clamp tonnage | KN | 1200 | 1400 | 1700 | 2300 | 2700 | ||||||||||
| Toggle stroke | mm | 360 | 380 | 435 | 475 | 540 | ||||||||||
| Space between tie-bars | mm | 410 * 410 | 420 * 420 | 460 * 460 | 520 * 520 | 570 * 570 | ||||||||||
| Mould Height | mm | 160 - 400 | 160 - 450 | 180 - 520 | 200 - 530 | 200 - 580 | ||||||||||
| Ejector stroke | mm | 100 | 120 | 135 | 140 | 150 | ||||||||||
| Ejector tonnage | KN | 30 | 50 | 50 | 70 | 70 | ||||||||||
| OTHERS | ||||||||||||||||
| Max. pump pressure | MPa | 16 | 16 | 16 | 16 | 16 | ||||||||||
| Motor power | KW | 14 | 14 | 21 | 28 | 36 | ||||||||||
| Heat power | KW | 7.55 | 9.3 | 12.3 | 14.8 | 16.8 | ||||||||||
| Machine dimension | m | 4.4*1.2*1.8 | 4.48*1.33*1.90 | 5.18*1.4*2.12 | 5.58*1.5*2.14 | 6*1.6*2.25 | ||||||||||
| Oil tank capacity | L | 220 | 270 | 300 | 300 | 380 | ||||||||||
| Machine weight | t | 3.8 | 4.3 | 6 | 7 | 8.5 | ||||||||||
Application
| | |
Home Products Application About Us Resources News Contact Us Privacy Policy