High Speed Servo Type plastic Oil pull cap Plastic Injection Molding Machine Prices with mold sale
DESCRIPTION
During the process of making oil pull caps for injection molding machines, product quality inspection and quality control are also required. By using testing equipment and technology, the size, appearance, and physical properties of the oil pull cap can be tested to ensure that the product meets the specified standards and requirements. Quality control also involves the selection and management of raw materials to ensure stable and reliable quality of plastic materials used in the injection molding process.
The process of making oil pull caps for injection molding machines can also be improved and optimized to improve production efficiency and save energy. For example, using advanced heating and cooling systems can shorten the injection molding cycle and cooling time, thereby improving production speed. In addition, automated and intelligent control systems can achieve remote monitoring and adjustment of injection molding machines, further improving production efficiency and product quality stability.
After the plastic fills the mold cavity, the injection molding machine continues to maintain a certain pressure and temperature, allowing the plastic to cool and solidify in the mold. The cooling time depends on the thickness and size of the oil pull cap, usually taking a few seconds to a few minutes.
Technical Parameter
| INJECTION UNIT | K-TEC120 | K-TEC140 | K-TEC170 | K-TEC230 | K-TEC270 | |||||||||||
| Screw diameter | mm | 35 | 38 | 42 | 38 | 42 | 45 | 42 | 45 | 50 | 45 | 50 | 55 | 50 | ||
| Screw L/D ratio | L/D | 22.8 | 21 | 19 | 22.1 | 20 | 18.7 | 23.5 | 22 | 19.8 | 23.4 | 21 | 19.1 | 25.2 | ||
| Shot volume(theoretical) | cm³ | 163 | 192 | 235 | 226 | 277 | 318 | 311 | 357 | 441 | 397 | 490 | 593 | 530 | ||
| Shot weight | g | 148 | 175 | 214 | 206 | 252 | 289 | 283 | 325 | 401 | 362 | 446 | 540 | 482 | ||
| Injection rate | g/s | 92 | 108 | 130 | 94 | 115 | 132 | 138 | 160 | 196 | 124 | 154 | 186 | 187 | ||
| Injection pressure | Mpa | 219 | 186 | 158 | 209 | 171 | 149 | 203 | 177 | 143 | 207 | 168 | 138 | 205 | ||
| Screw speed | r.p.m | 220 | 220 | 200 | 175 | 185 | ||||||||||
| CLAMPING | ||||||||||||||||
| Clamp tonnage | KN | 1200 | 1400 | 1700 | 2300 | 2700 | ||||||||||
| Toggle stroke | mm | 360 | 380 | 435 | 475 | 540 | ||||||||||
| Space between tie-bars | mm | 410 * 410 | 420 * 420 | 460 * 460 | 520 * 520 | 570 * 570 | ||||||||||
| Mould Height | mm | 160 - 400 | 160 - 450 | 180 - 520 | 200 - 530 | 200 - 580 | ||||||||||
| Ejector stroke | mm | 100 | 120 | 135 | 140 | 150 | ||||||||||
| Ejector tonnage | KN | 30 | 50 | 50 | 70 | 70 | ||||||||||
| OTHERS | ||||||||||||||||
| Max. pump pressure | MPa | 16 | 16 | 16 | 16 | 16 | ||||||||||
| Motor power | KW | 14 | 14 | 21 | 28 | 36 | ||||||||||
| Heat power | KW | 7.55 | 9.3 | 12.3 | 14.8 | 16.8 | ||||||||||
| Machine dimension | m | 4.4*1.2*1.8 | 4.48*1.33*1.90 | 5.18*1.4*2.12 | 5.58*1.5*2.14 | 6*1.6*2.25 | ||||||||||
| Oil tank capacity | L | 220 | 270 | 300 | 300 | 380 | ||||||||||
| Machine weight | t | 3.8 | 4.3 | 6 | 7 | 8.5 | ||||||||||
Application
| | |
Home Products Application About Us Resources News Contact Us Privacy Policy